Exhibitors 2026

EVOTEC is a national high-tech enterprise that develops and produces low-voltage and high-voltage land and sea generators, as well as gas generators, with an annual output of 30,000 units. Power: 6.8−10,000 kW, voltage: 110−15,000 V, frequency: 50/60 Hz, protection degree: IP21-IP57. The products are certified according to CE, PC, and CCS, comply with international and national standards, and are suitable for use in harsh conditions and high altitudes.

go to website

Manto Company, founded in 2005, specializes in industrial heat transfer and offers a full range of thermal oils with an operating temperature range from -120°C to +425°C. Services include regular oil analysis, regeneration, and cleaning of thermal oil by removing low-boiling fractions.

go to website

ABS ZEiM Automation JSC manufactures:

• Intelligent electric drives for modern APCS requirements
• KRU-6 (10) kV series S-410
• RUSN-0,4 kV series "KSATO"
• Motor control cabinets of shut-off and control valves
• Complete bus ducts and busbars (TZK, TZKR, TENE, SHZK)

go to website

RPE "Aviazgaz-Soyuz+" is a Russian research and production enterprise located in Kazan (Republic of Tatarstan). It was founded in 1995 and specializes in the development and manufacture of gas technology equipment, being one of the leading enterprises in this sector for Russia’s gas transportation system.

go to website

AGV is a Russian manufacturer of high-quality components for reciprocating compressors and gas piston engines. The company produces valves, packing assemblies, piston rings, rods, pistons, and other critical parts, with a strong focus on premium materials and innovative engineering solutions.

AGV components are fully compatible with equipment from foreign manufacturers of compressors Ariel Corporation, Dresser Rand, Ajax, SIAD, Burckhardt, Howden and gas piston engines CAT, Waukesha, Wartsila, etc., which allows you to replace imported parts without modifying equipment.

go to website

2TEST Company is a Russian manufacturer of hardware and software systems for automation of utility networks, as well as a supplier of measuring and testing equipment for optical and wireless communication lines, explosion-proof smartphones, test benches, control and measuring equipment.

go to website

The system for monitoring air pollution accumulation conditions based on measuring inversion and wind characteristics is presented. The technology was developed and tested to determine the dependence between measured concentrations and the source’s emission power for protection health and environments.

go to website

BiometricLabs develops hardware and software solutions for pipeline and industrial infrastructure diagnostics. The company’s flagship product detects and precisely locates leaks using wireless acoustic sensors, IoT technologies, and artificial intelligence. The solution helps utilities, energy companies, and industrial enterprises reduce resource losses, prevent failures, and improve infrastructure reliability.

go to website

JSC RK Vector was established in 1986 to develop space radar systems and is currently a multidisciplinary company with hundreds of completed projects. The company owns more than 5000m2 of production space and is staffed by specialists with extensive experience in the development, assembly and manufacture of equipment, engineering and telecommunications complexes and structures for military and civilian purposes. The quality management system complies with GOST R ISO 9001−2015, GOST RV 0015−002−2020 and has been certified according to the Military Register system. One of the important areas of activity of JSC RK Vector is the development and supply of autonomous energy sources of energy supply for the Arctic zones and northern regions, including for oil and gas industry facilities.

go to website

Comprehensive design, manufacturing of tanks for various purposes, and construction in the general contractor status.

go to website

Velan JSC has been a manufacturer of explosion-proof electrical equipment since 1958 and is an exporter to CIS countries. The company’s production facilities cover an area of 130,000 m². Velan has its own design bureau and testing laboratory. Full-cycle in-house production ensures the highest product quality through control at every stage of the manufacturing process.

go to website

GosNIIhimanalit JSC has for many years specialized in the development and production of technical means for chemical reconnaissance, chemical monitoring, as well as verification and calibration of gas analyzers and gas alarms.
The licenses obtained by GosNIIkhimanalit JSC from the Ministry of Industry and Trade of the Russian Federation allow the institute’s laboratories to perform the following types of work:

• Development and production of gas alarms and gas analyzers;
• Testing for type approval of measuring instruments;
• Verification of measuring instruments;
• Development and certification of measurement procedures;
• Chemical analytical research.

The long-term operational experience of the company’s gas analyzers and gas alarms confirms their high efficiency, absolute reliability even under extremely harsh conditions, and durability.
The consumers of the company’s products include organizations responsible for occupational safety, industrial safety, and environmental protection at major companies such as Transneft PJSC and Tatneft PJSC.

go to website

Our goal is to implement an effective cluster model of economic development in Russia through close collaboration between government, science, and business. We are scaling an ecosystem that fosters industrial cooperation, mutual investment, and innovative products.
The association addresses two strategic tasks:

• It provides support to the members in promoting their products to large corporations, regions, and friendly countries.
• It attracts federal subsidies and concessional financing for their projects.

go to website

LLC "VOLGA INDUSTRIAL ENGINES" produces high-tech diesel and gas-piston engines according to strict regulations and using modern production technologies. The engines have a displacement ranging from 19.6 to 52.3 liters, and their power range is from 315 kW to 1980 kW. Our company offers its partners the following services:
— a full range of services, including engine maintenance and warranty support of any complexity;
— regular maintenance seminars at our company;
— consultations from the engineering and design service.
Since 2020, our company has produced and sold gas-piston engines with a total capacity of 170 MW, as well as diesel engines with a total capacity of 400 MW.

go to website

We implement technical endoscopy and remote visual inspection systems for remote visual control of pipes, tanks, and equipment. Reliable non-destructive diagnostics without disassembly, reduced downtime, and improved industrial safety.

go to website
go to website

Do Right Co., Ltd offers the X-Spark professional tool range, widely used in the oil and gas industry, mines, pipeline construction, and pharmaceuticals.
Our assortment includes over 360 types of non-sparking tools, including wrenches, sockets, and hammers, made from high-quality steel alloys such as beryllium copper, aluminum bronze, as well as stainless steel.
X-Spark tools prevent sparking and are suitable for use in explosive environments. All products comply with Russian and international quality standards.
We guarantee fast delivery and professional consultation on tool selection.

go to website

GORELTEX is a Russian manufacturer of explosion-proof electrical equipment since 1993. We operate a full production cycle, have our own engineering center and supply to over 50 countries worldwide.

go to website

Energokabel Plant is a leading Russian enterprise and manufacturer of high-quality cables and wires for the oil and gas industry, energy sector, industrial applications, and infrastructure projects. It ensures the reliability and safety of its products for use in the most extreme conditions.

go to website

IBMM Technology is one of the leading suppliers of mining equipment and infrastructure in Russia. We’ve been operating in the market since 2017 and specialize in supplying ASIC hardware and designing and launching turnkey mining platforms. We have infrastructure capacity exceeding 100 MW.

go to website

IMERALD has been operating in the field of industrial waste management for over 10 years, providing a full range of services for waste collection, transportation, recycling, and neutralization. We have developed our own thermal utilization technology using MIG furnaces.

go to website

NPP IRVIS LLC is a developer and manufacturer of ultrasonic and vortex IRVIS flowmeters for metering gaseous energy carriers and water vapor with a range of measured flow rates from 0.12 to 20,000 m3/h, under operating conditions. NPP IRVIS LLC also produces gas dynamic calibration units for carrying out verification work with the possibility of creating costs in the range from 0.003 to 16,000 m3/h. Our company has a research laboratory that allows conducting research in the field of gas dynamic processes occurring in pipelines and channels of various cross-sections, the results of which are used in technical solutions, including in the development of our products.

go to website

Key areas of activity:
* Manufacturing, repair, and maintenance of gas turbine engines (GTE) with capacities of 16−18 MW
* Design, production, and servicing of standardized gas pumping units (GPU) with capacities of 16−25 MW, and gas distribution stations (GDS) with capacities from 2,000 to 250,000 Nm³/h
* Development and production of gas turbine power plants (GTPP) using in-house turbine drives
* Comprehensive turnkey equipment supply

go to website

Camozzi Pneumatic LLC is a technology leader in the development and production of pneumatic components and systems for industrial automation.

go to website

СONSTANTA LLC was founded in 1993 to conduct scientific and applied research and develop non-destructive testing tools for all types of protective coatings, as well as general-purpose and special-purpose products made of metallic and structurally heterogeneous materials.

The company develops and manufactures non-destructive testing instruments and tools for materials, products, and protective coatings of all types:

• specialized thickness gauges for galvanic coatings of all types,
• thickness gauges for protective coatings of all types,
• ultrasonic thickness gauges for metallic and non-metallic products,
• ultrasonic transducers for thickness measurement and flaw detection,
• electric spark flaw detectors,
• comprehensive quality control devices for protective coatings,
• incoming paint inspection devices,
• metal hardness testers,
• conductivity meters,
• eddy current flaw detectors.

All equipment is certified.

go to website

Cryogenmash is the biggest company in Russia in cryogenic equipment design and manufacturing.

Priority areas — design and implementation of new technologies in LNG production, storage and transportation. Cryogenmash expands own cryogenic valves production, including LNG, and realise R&D for natural gases expander.

go to website

PrivateNap is an innovative power nap and relaxation pod designed for the oil and gas industry. It is ideal for psychological relief rooms, employee rest areas, and executive offices. A 20-minute session helps reduce workplace stress while improving focus, alertness, and concentration.

go to website

RealLab! is a Russian developer and manufacturer of equipment for industrial automation. PLCs, I/O modules, operator panels, industrial PCs and monitors, spark protection barriers, interface converters, power supplies, surge protectors, and sensors. Many of these products are included in the register of the Russian Ministry of Industry and Trade.

go to website

Leading manufacturer of rubber compounds in Russia. Operating since 1962. 500+ rubber compounds. Swelling rubber compounds. NBR, HNBR. Fluorocarbon-based rubber compounds such as Viton, FKM, and FFKM. Packer UENP. RUP sleeves. Own research center. Development and optimization of formulations. Expert consultations.

go to website

Manufacturer of butterfly valves with symmetrical and triple-eccentric locking designs. We offer bore sizes from 100−3000 mm and operating pressures of 0.6; 1.0; 1.6; 2.5; 4.0; 6.3; 10.0 MPa.
We have a manufacturing facility, machine tools, a test bench, a design department, and other resources that enable us to produce high-quality shutoff valves.
Our team is young and educated, with a fresh and modern perspective on business and consumers.
Company Mission: To earn respect for Russian products.

go to website

St. Petersburg International Gas Forum is an annual industry event that brings together leaders of the oil and gas industry to discuss current issues and showcase technological solutions. The Forum is supported by the Ministry of Industry and Trade of the Russian Federation, the Ministry of Energy of the Russian Federation, and the Government of St. Petersburg.

go to website

PLEKSOR LLC is a Russian manufacturer of gas reducing and gas measuring equipment under the registered trademark РЕД®: gas pressure regulators DN20-DN300 up to 10 MPa for natural gas, associated petroleum gas (APG), liquefied petroleum gas (LPG), air, nitrogen and hydrogen; rotary and turbine gas meters G10-G400; gas filters; safety relief valves.

go to website

The company produces chemical agents and materials for construction of gas, gas condensate and oil wells of various complexity. Chemical agents and materials by JSC NPO Polycell allow to solve various tasks in the field of well drilling, stimulation, major maintenance and recovery works. Agents are used for preparation and processing of drilling and cementing slurries, for process liquids used for prevention and elimination of problems.

go to website

PANAM is one of the world’s leading manufacturers of instrument fittings and valves made of SS316 and special alloys. We also produce Pressure and Differential Pressure Transmitter, Temperature Transmitter, Regulators, Thermowells & Accessories, Condensate Pot, Air headers in various configurations.

go to website

ROSKLAPAN manufactures balancing, control, and shut-off valves up to 40 MPa. The company’s product range includes:
• 2- and 3-way control valves with electric and pneumatic actuators;
• Differential pressure, flow, and temperature regulators;
• Solenoid valves;
• Shut-off valves up to DN 2500 mm and PN400.

go to website

Since 1992, one of the leaders in the field of development, production and implementation of equipment and special software for Intergrated Control & Security Systems (ICSS) of any complexity.

• Extensive referrence list of installed base at manufacturing facilities and infrastructure sites, including those under harsh operating conditions.
• INDIGIRKA ICSS is SIGMA’s flagship product designed for large-scale, industrial, distributed facilities
• INDIGIRKA ICSS is highly efficient and reliable fire & gas (FGS) protection, access control and video surveillance system

Among our top customers are: SIBUR, TATNEF, GAZPROMNEFT, ROSNEFT, ROSASTOM, RUSAL, Ministry of Defense, Federal Security Service (FSB) and many others.

go to website

We specialize in performing well silencing (including "gentle"), treatment of the bottomhole zone of formations (including both acidic and acid-free methods of exposure), repair and insulation work (including limiting water flow, eliminating column overflows, eliminating casing leaks, leveling the intake profile, etc.) with reagents own production: "Diskor", "Satis", "Polyphros", "Hydrosil", "Bloksin", "Plast ST", "Polisom", "Unisalt", "Flock-ST", "Eximol" and others.

go to website

CSoft Kazan is a partner-expert of the CSoft group of companies. We specialize in the supply and implementation of CAD solutions for Russian engineers. Installation, software authorization, training, pilot projects, and technical support — this is our comprehensive approach to your challenges.

go to website

System-Service Group is a diversified enterprise providing equipment and services in the field of well construction, oil production, and reservoir pressure maintenance.

go to website

PK SKORSA LLC is a manufacturer of parts and components for gas turbine engines and gas compressor units. The primary focus is on components for Russian and foreign gas turbine engines (manufacturing and overhaul):
1. Pressure regulators, safety, check, and solenoid valves;
2. Solenoid actuators;
3. Gearboxes / reduction drives;
4. Speed sensors;
5. Fuel control equipment.

The secondary focus is the manufacture of parts and components for fuel and energy complex equipment:
1. Machining (own fleet of Doosan CNC turning and milling machines);
2. Blank preparation section (laser cutting, band sawing machines);
3. Welding section;
4. Inductor coil winding;
5. Assembly and testing.

The design and engineering department enables work based on request forms with in-house design documentation, customer drawings, as well as reverse engineering of provided samples.

go to website

A full range of well services: Construction of small diameter wells, cutting of lateral and lateral horizontal shafts, various types of hydraulic fracturing, coiled tubing and rope-container technologies, preparation and maintenance of drilling fluids and cementing work, transportation services.

go to website

TAGRAS Holding is a Russian oilfield services group established in 2006. Its structure comprises 8 divisions and 54 enterprises providing a full range of services for oil and gas companies.
Most of the holding’s enterprises were founded in the 1950s, during the early days of oil production in the Republic of Tatarstan. Today, these are modernized companies with extensive experience, competent personnel, and their own production facilities and equipment, capable of effectively solving clients' tasks.
The client portfolio of TAGRAS divisions includes over 1,500 customers from Russia, CIS, and non-CIS countries. The service portfolio comprises more than 1,350 product lines and services in geological exploration, drilling, well workover, production enhancement, major repairs and construction, road construction, transportation, energy, and information technology.
The holding is developing in accordance with its corporate strategy extending until 2030. This strategy is based on comprehensive transformation: digital, cultural, organizational, and operational.
While current objectives may change depending on market conditions, new challenges, circumstances, and risks, the group’s corporate values, mission, and principles remain constant.

go to website

Construction, reconstruction, repair of pipelines, oil and gas, petrochemical, energy industry facilities. Industrial safety, diagnostics, adjustment of power equipment. Production of transformer substations, control units, expanded clay blocks, reinforced concrete products (road slabs, transmission line supports, FBS blocks, reinforced concrete parts SKN). Repair of electric motors, generators

go to website

TAIF-NK Joint-Stock Company is one of the Republic of Tatarstan and the Russian Federation, in general, in the oil refining sector. It integrates three plants, namely Crude Oil Processing Plant, Gazoline Plant and Heavy Residue Conversion Complex (HRCC).

go to website

For over 30 years, the TECOH Group has been a leading provider of hardware and software solutions for Automated Process Control Systems and Electrical Equipment Control Systems. TECOH solutions are widely deployed in the power, petrochemical, and other industrial sectors.

go to website

Production of temperature sensors based on thermocouples and RTD elements, protective and mounting fittings for them.

go to website

Technopromplast is a leading Russian manufacturer of polymer compounds, masterbatches, UV protection, light stabilizers, as well as various fillers, granulates, and composite materials for filling and coloring polymers under the "Tevalon" brand.

go to website

Key areas of activity:

• Manufacturing and service of mechanical engineering, oilfield, and drilling equipment
• Production of pipes and fittings for oil and gas pipelines, product pipelines, and heating systems
• Manufacturing of casing pipes, tubing, and couplings therefor
• Production of polyethylene pipes for water and gas supply

go to website

Key areas of activity:
• Geological exploration, geophysical and geochemical surveys in the field of subsoil study and reproduction
of mineral resources
• Geophysical support for the construction of exploratory, prospecting and production wells;
• 2D, 3D, 3D-3C seismic acquisition;
• Electrical, gravity, magnetic prospecting;
• Geochemical studies;
• Geological & geophysical data processing;
• Vertical Seismic Profiling;
• Information technology support (MWD, LWD)

go to website

Core Business Areas:
-Operation and overhaul of main pipeline transport facilities;
-Crude oil and petroleum products storage;
-Transportation of crude oil and petroleum products via main pipelines.

go to website

Trust Turbine Technology JSC specializes in overhaul, manufacturing of rotating equipment, gas and steam turbine units, centrifugal and screw compressors.
Clients of the company: energy, electric power, oil refining, oil and gas, and petrochemical enterprises.

go to website

Manufacturing and supply of flange gaskets.
We produce spiral wound gaskets and flat gaskets (made of paronite, rubber, PTFE, graphite, copper, aluminum). In-house production, large warehouse, short delivery times.
We operate across Russia, the EAEU, and the CIS.

go to website

The PRIVODY GZ COMPANY enterprise specializes in the production of multi-turn and non-multi-turn electric drives, which are used to control shut-off and shut-off-and-control valves in the chemical, oil, gas, and energy industries.

go to website

JSC NPO EMK — one of the largest suppliers and manufacturers of pipeline fittings in the Russian market, which has a unique combination of a powerful production base, a wide range of products and engineering potential.

go to website

Energoservice Engineering Center has been providing services, products and expertise in the field of gas compression equipment (Ariel, Cooper, Burckhardt, Dresser-Rand, Ajax, Caterpillar, Waukesha and other brands) since 1999:

• Equipment maintenance and repair services;
• Repair of cylinder head and auxiliary equipment for Caterpillar and Waukesha engines;
• Supply of original spare parts;
• Reverse engineering. Local production of spare parts under ARP brand.

go to website
go to website

The Kazakhstan Oil and Gas Council "PetroCouncil" is an industry association that brings together oil and gas operators, SMEs, and government bodies to promote local content development, business cooperation, localization, training, and support for oil and gas projects in Kazakhstan.

go to website